41
Artillery / Re: New Frag ID
« Last post by emike123 on September 28, 2023, 03:57:42 PM »It is about impossible for us to help you with this from a photograph without any measurements, but the good news is you can figure this out yourself with the aid of a $4 compass like kids use in grade school. Set the jaws to a 5.5" (err to less) from the metal point to the pencil tip. Draw an arc on a heavy duty piece of poster board or card stock and cut along this line. Then put this curve against the outside surface of the frag. If it fits like a glove, it's a frag to an 11" spherical shell.
I know you can do it! Good luck.
I know you can do it! Good luck.