Bullet and Shell Civil War Projectiles Forum

« previous next »
Pages: [1]

Author Topic: Solid Base Shaler Section  (Read 9869 times)

AggieReb

  • Guest
Solid Base Shaler Section
« on: October 31, 2012, 05:37:39 PM »
Removed
« Last Edit: July 04, 2015, 02:00:38 PM by AggieReb »
Logged

emike123

  • Administrator
  • Hero Member
  • *****
  • Posts: 2348
    • Bullet and Shell
    • Email
Re: Solid Base Shaler Section
« Reply #1 on: October 31, 2012, 06:37:07 PM »
I need a middle section!

You might call Nick Harris at Regimental Headquarters in Falmouth, VA.  He has always had pieces of Shalers when I have visited him. 
« Last Edit: October 31, 2012, 06:40:59 PM by emike123 »
Logged

misipirelichtr

  • Full Member
  • ***
  • Posts: 244
    • Email
Re: Solid Base Shaler Section attention Aggie Reb
« Reply #2 on: November 02, 2012, 10:39:08 AM »
I have this solid base section.  .582 height, .570 diameter.  Solid base; recovered in Virginia.  If it is the one you are looking for, shoot me an e-mail with your address and I'll stick it in the mail to you
Logged

misipirelichtr

  • Full Member
  • ***
  • Posts: 244
    • Email
Re: Solid Base Shaler Section - attention emike123
« Reply #3 on: November 02, 2012, 10:41:59 AM »
Mike, I have two middle sections -if either of them are the one you need, let me know and I'll send them to you.  The shorter of the two is .615 in height by .575 in diameter.  The taller is .750 in height and .562 in diameter.  Both were recovered in Virginia
Logged

ETEX

  • Hero Member
  • *****
  • Posts: 814
Re: Solid Base Shaler Section
« Reply #4 on: November 02, 2012, 02:28:05 PM »
Heck, if the price is right I will sell the bottom section to Wes and a middle section to Mike and have a spare top and then buy a new complete one. :)
Logged

emike123

  • Administrator
  • Hero Member
  • *****
  • Posts: 2348
    • Bullet and Shell
    • Email
Re: Solid Base Shaler Section
« Reply #5 on: November 02, 2012, 05:52:23 PM »
Jimmy, I am going to nickname you "Mr. Goodwrench" because you have all these parts.  While you are rummaging through your spares bin, do you also have the top plate to a 7" stand of grape to go on that one I got when we stopped in on Joe Gerache?

;-)
Logged

misipirelichtr

  • Full Member
  • ***
  • Posts: 244
    • Email
Re: Solid Base Shaler Section
« Reply #6 on: November 03, 2012, 12:00:51 AM »
I wish......... :)   
Logged

Bill Ewing

  • Jr. Member
  • **
  • Posts: 62
    • Email
Re: Solid Base Shaler Section
« Reply #7 on: November 07, 2012, 09:04:50 AM »
I have a few spare mismatched parts as well if you need one or want to compare for a better match.

Bill
Logged
Pages: [1]
« previous next »