Bullet and Shell Civil War Projectiles Forum
Relic Discussion => Artillery => Topic started by: CarlS on November 01, 2017, 07:24:08 PM
-
Hello,
I recently added a 7-inch Mullane to my collection that has a number of symbols cast into the sabot. The most notable is a large "2" but there is also an "A" and "H" on each side of the center hole.. See the picture below. This weekend I picked up a 7-inch Brooke that had a large "A" cast into it. Also of note is the word "Brooke" stamped into it which is nice. What other letters, symbol or words have people seen stamped onto these type sabots? Also, does this only appear on the 7-inch shells or have you seen it on 6.4-inch or other sizes?
-
I looked at the one of these 7" Tennessee sabots I have off the projectile and sadly there wasn't a marking of any kind. I have some 6.4 and 7in Brooke ratchet disc sabots that have roman numerals etched in them as well as the word "BROOKE." I known of other markings on those. I get a kick out of these markings and assume they were manufacturing aids or inspector marks, but would be interested in other examples being shared.
-
Have a partial 7" brooke with two outlined star's (double marked) my other 7, my 7" tenn and my 6.4 are all unmarked